Cleaning - Ambiano MX2016 Manual Del Usuario

1. Place the base
2. Place the bowl
3. Fit the frothing insert
4. Put the prepared ingredients into the bowl. Make sure that you use an ap-
propriate amount.
The ingredients must not pass the MAX mark once frothed.
5. Put the lid and the motor block
(see chapter "Assembling the mini food chopper", steps 4 – 6, see fig. A, B, C).
6. Connect the mini food chopper to the power supply.
7. Push the pulse button
down for no more than 2 minutes until the ingredients have been frothed
(most ingredients require much less time to be processed).
Then let the motor block cool off.
Repeat the process if the ingredients have still not been adequately frothed.
8. Disconnect the mini food chopper from the power supply.
9. Carefully take the motor block, the lid and the frothing insert off. To do so, reverse
the steps described in the chapter "Assembling the mini food chopper".
10. Take the frothed ingredients out of the bowl.

Cleaning

WARNING!
Risk of electric shock!
Handling the mini food chopper improperly may result in an
electric shock. Water that has penetrated the housing may
cause a short circuit.
− Always switch the mini food chopper off and pull the power
plug out of the socket before you clean the mini food chopper.
− Never immerse the mini food chopper or the motor block
in water.
− Make sure that no water penetrates the housing.
− Do not use a steam cleaner for cleaning.
AFTER SALES SUPPORT
1-800-886-8506
USA
8
on a level, dry and non-slip work surface (see fig. A, C).
7
on the base.
5
on the bolt
2
1
to froth the ingredients. Hold the pulse button
9
in the bowl.
on the bowl
Cleaning
[email protected]
USA
15