Operation; Using The Mini Food Chopper With The Blade Insert; Using The Mini Food Chopper With The Frothing Insert - Ambiano MX2016 Manual Del Usuario

USA

Operation

Operation

Using the mini food chopper with the blade insert

You can chop and/or mince your ingredients with the blade
insert. Always cut the ingredients into small pieces before you
put them in the bowl. Do not use any hard ingredients as they
could damage the blade insert.
1. Place the base
2. Place the bowl
3. Fit the blade insert
4. Put the prepared ingredients into the bowl.
Do not fill the bowl with ingredients past the MAX mark.
4
5. Put the lid
(see chapter "Assembling the mini food chopper", steps 4 – 6, see fig. A, B, C).
6. Connect the mini food chopper to the power supply.
7. Push the pulse button
ingredients and then let the motor block cool off.
Repeat the process if the ingredients have still not been adequately chopped up.
8. Disconnect the mini food chopper from the power supply.
9. Carefully take the motor block, the lid and the blade insert off. To do so,
reverse the steps described in the chapter "Assembling the mini food
chopper".
10. Take the chopped ingredients out of the bowl.

Using the mini food chopper with the frothing insert

You can stir and beat liquid foods such as eggs and cream with
the frothing insert.
If you use the frothing insert, make sure that you do not add
an excessive quantity to the mini food chopper as the volume
of the ingredients used will increase. As a reference value, we
recommend not using more than 200 millimeters.
14
[email protected]
8
on a level, dry and non-slip work surface (see fig. A, C).
7
on the base.
10
on the bolt
and the motor block
1
down for no more than 15 seconds to chop the
9
in the bowl.
2
on the bowl
AFTER SALES SUPPORT
1-800-886-8506
USA