Clockand Timer; Timer On/Off - Kenmore 911.45241 Guía Para El Uso Y Cuidado

OPERATION
ClockAnd Timer
The CLOCK and TIMER are controlled with touch pads. They do not control
any of the oven operations.
Press CLOCK to make display
flash
The timer indicator light will stop
flashing when the countdown
starts The colon will continue to
flash to indicate the countdown is
active
2, Use the UP or DOWN touch
pad to set the correct time of day
The colon will flash while you are
setting the time
3, The clock will automatically start
keeping time within 1 minute or
you may press the clock pad for
an immediate start
To reset the timer during countdown
use the UP or DOWN arrow pad° The
TIMER indicator light will flash and
you can reset the TIMER. The TIMER
will count down from the new time you
select and the TIMER indicator light
stops flashing in about 3 seconds.
The TIMER displays hours and
minutes. The maximum setting is
9 hours and 50 minutes on the
TIMER° Seconds will be displayed
during the countdown of the last
minute only The TIMER will beep
when one minute remains in the
countdown.
.
2.
Press TIMER ON/OFF "0:00" and
the timer indicator light will flash
Select the desired time using the
UP or DOWN touch pad The
TIMER will begin to count clown
about 4 seconds after you select
the time. If you do not wish to wait
4 seconds, press TIMER and the
countdown will begin immediately.
If you wish to cancel the TIMER
while it is counting down, press
TIMER ON/OFF The display will
return to the time of day..
The END-OF-CYCLE tone will
sound when the TIMER countdown
is complete. The display wilt flash
"O:00" and you will hear a series of
beeps. Press TIMER ON/OFF or
CLOCK to stop the tone,
7