Ordering Spare Parts; Dimensions - ESAB Origo Arc 250 edw Manual Do Usuário

Chart 7.1
Type of fault
The engine don't run.
There is no tension in the outlets
Poor welding performance
The thermal overload trip operates frequently
8

ORDERING SPARE PARTS

The OrigoArc 250 edw are designed and tested in accordance with the
standards. Its the obligation of the service unit which has carried out the
service or repair work to make sure that the product still conforms to the said
stantard
The maintenance should be done by a professional trained and qualified.
U se only original parts supplied by ESAB or approved by them.
To order spare parts see the P/N in section 12.
Spare parts may be ordered through your nearest ESAB Authorized Services or from its
Sales Distributors. See the last page of this manual.
To order spare parts for the engine check the manual that the P/N and the Authorized
Services of the manufacturer.
9

DIMENSIONS

Check for fuel in the tank.
Check if the battery is connected and charged.
Check the level of engine oil is not below the specified.
Check if the switch is in "RUN " position and the circuit
breaker is on.
Check that the corret current value is set.
Check that there are no obstructions in the
aspiration/exhaust ducts of the alternator, the engine or
the housing which could restrict the flow of cooling air.
Make sure that you are not exceeding the duty cicle.
- 35 -
Action