Corrective Maintenance; Faulting Tracing - ESAB Origo Arc 250 edw Manual Do Usuário

Table 6.1.2 - Motor GX 690
Regular sevice period (3)
Perfom at every indicated month or operating hour
interval, whichever comes first.
Engine oil
Engine oil filter
Air cleaner
Spark plug
Spark arrester
(Applicable types)
Idle speed
Valve clearence
Combustion chamber
Fuel filter
Fuel tube
* Replace the paper air filter only.
(1) Service more frequently when used in dusty areas.
(2) These items should be service by your Honda servincing dealer, unless you
have the proper tools and are mechanically proficient. Refer to the Honda shop
manual for service procedures.
(3) For commercial use, log hours of operation to determine proper maintenance
intervals.
(4) In Europe and other countries where the machinery directive 2006/42/EC is
enforced, this cleaning should be done by your servicing dealer.
Failure to follow this maintenance schedule could result in non-warrantable failures.
6.2

Corrective Maintenance

In order to ensure the perfect functioning and performance of a ESAB equipment, use
only original parts supplied by ESAB or approved by them.
All guarantee undertakings from the supplier cease to apply if the customer uses non-
original or non -approved parts when replacing any of them.
Spare parts can be order from the ESAB Authorized Services or from its Sales
Distributors listed on the last page of this Manual. Always inform the Equipment Model
and Serial Number.
7

FAULTING TRACING

Try these recommended checks and inspections before sending for an authorised
service technician.
Each
Use
Check level
o
Change
Replace
o
Check
Clean
Replace
Check-adjust
Replace
Clean
Check-adjust
Check-adjust
Clean
Replace
Check
- 34 -
First Every 6
month months
or or
20 100
Hours Hours
O
O
Every
200 horas
o (1)
O
(4)
O
After1000 horas (2)
Every 2 years (replace if necessary) (2)
Every Every
year 2 years
or or
300 500
hours Hours
o *
O
o (2)
o (2)
o (2)