Sony HANDYCAM DCR-SX45 Guía De Operaciónes página 15

To charge with a computer
This function is useful if the AC Adaptor is not at hand.
 Turn off the power of your camcorder, then attach the battery.
 Connect your camcorder to the computer that is turned on with the Built-in USB Cable.
 When charging is finished, terminate the USB connection between your camcorder and
computer (p. 35).
 Notes
Correct operation with all computers is not guaranteed.

Charging the battery or the connection with customized or hand-built computers is not guaranteed.

Depending on the type of USB device used, charging may not function properly.
If you connect the camcorder to a notebook computer that is not connected to an AC power source, the

battery of the notebook computer may be depleted rapidly. In this case, do not leave your camcorder
connected for a long time.
Tips

You can charge your camcorder by using the Built-in USB Cable from the wall outlet (wall socket) with

the USB charging AC adaptor AC-U501AD/AC-U50AG (sold separately). You cannot use Sony portable
power unit CP-AH2R/CP-AL (sold separately).
The USB charging AC adaptor may not be available in some countries/regions.

The CHG (charge) lamp may not light when the battery is low. Charge with the AC adapter in such

situation.
See page 55 on recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery
pack ().
US
1