Installation Procedure; Installation Of Control Console - Gaggenau VL 414 111 Instrucciones De Instalación

2 If the front panel is more than 1" (26 mm) thick: mill
out the rear of the front panel so that it is no thicker
than 1" (26 mm). Choose the dimensions of the
milled recess according to the control panel.
For flush installation:

Installation Procedure

Installation of control console

Note: Only install the appliance in conjunction with the corresponding control console.
1 Remove the packaging of the control knobs and the
protective film from the light rings.
2 Hold the bracket against the front panel from the
rear. Insert the control knob in the holes from the
front and screw it down it from the rear with the nut.
I n s t a l la t i o n P r o c e d u r e
11