Wilo Stratos MAXO Serie Instrucciones De Instalación Y Funcionamiento página 141

Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Electrical connection
Fig. 29: Installing Wilo-Connector
10. Insert the Wilo-Connector and lock the metal clamp over the retaining pins.
NOTICE
The metal clamp on the side of the Wilo-Connector housing can only be unlocked
using tools!
11. Restore power supply.
Remove
1. Disconnect mains voltage.
Fig. 30: Removing the Wilo-Connector
2. Undo the metal clamp from the mechanical lock on the housing using suitable
tools.
For this purpose, move the tools towards the outside and simultaneously open the
metal clamp towards the housing.
3. Pull off the Wilo-Connector.
en
141