Troubleshooting - Dacor DOP36M96GL Manual De Instrucciones

Troubleshooting

If you run into unexpected trouble, look first for a solution in the tables below. If you are
still having trouble after trying the suggested solution, call 833-35-ELITE (833-353-5483).
Gas safety
Problem
You smell gas.
Surface burner
Problem
No burner ignite
Surface burners
do not light. But
power and gas are
properly supplied.
A surface burner
clicks during
operation.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 93
Possible cause
The surface burner knob is
not in the OFF position and
the burner is not lit.
There is a gas leak.
Possible causes
The cooktop is unplugged.
A fuse may have blown; the
circuit breaker may have
tripped.
The gas supply is not
properly connected or
turned on.
The control knob is not set
properly.
• The burner caps are not
in place.
• The burner base is
misaligned.
The control knob has been
left in the Lite position.
Action
Turn the burner knob to OFF.
• Clear all occupants from the room/
building/area.
• Immediately call your gas supplier
from a neighbor's home; your
own phone may cause a spark
that ignites the gas; follow the gas
supplier's instructions.
• If you cannot reach your gas
supplier, call the fire department.
Action
Make sure the power cord is plugged
into a live, grounded outlet.
Replace the fuse or reset the circuit
breaker.
See your cooktop's Installation
Instructions. Have a qualified
technician connect/turn on the gas
supply.
Push in the control knob and turn it to
the Lite position.
• Clean the electrodes.
• Put the burner cap on the burner
head.
• Align the burner base.
After the burner ignites, turn the
control knob to the desired setting;
if the burner still clicks, contact a
service technician.
English 93
2019-07-29 10:52:50