NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 89
4. Partially close the door to engage the
door latch locks. The door will stop at
this point.
5. Grasp each side of the door below the
handle, and lift the door slightly to
expose the cabling at the base.
NOTE
LED light's Wire Harness should be
disconnected. Place the door near the
range and be careful not to let the door
fall down. The door glass is fragile.
6. Disconnect the LED light's Wire
Harness from the bottom right of the
door.
7. Set the oven door aside on the
prepared covered work surface with
the oven door resting on its handle.
English 89
2019-07-29
10:52:50