Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PROBLEM
The Cooktop
You have a function error code.
control beeps
and displays an
error code.
The surface
You may be using inappropriate
units will not
cookware.
maintain a
rolling boil or
In some areas, the power
will not cook
(voltage) may be low.
fast enough.
The surface
A fuse in your home may be
units will not
blown or the circuit breaker
turn on.
tripped.
The cooktop controls are set
improperly.
The surface unit
This is normal. The unit is still on and hot.
stops glowing
when changed
to a lower
setting.
Areas of
Food spillover was not cleaned.
discoloration on
the cooktop.
The surface is hot and the model
features a light-colored cooktop.
POSSIBLE CAUSE
CODE
CAUSE
Pan Detection Error
Knob Setting Error
Over Temperature Error
CODE
CAUSE
Top Sensor Open or
Short Error (Sensor-Top)
IGBT Sensor Open or
Short Error
(Assy-Inverter Module)
DC fan motor Open or
Lock Error
Communication Error
English - 85
SOLUTION
• Turn off the knob and set
again. If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the
power. If this does not solve
the problem, call for service.
• Call for service.
• Use pans which are flat and
match the diameter of the
surface unit selected.
• Cover the pan with a lid until
the desired heat is obtained.
• Replace the fuse or reset the
circuit breaker.
• Check if the correct control
is set for the surface unit you
are using.
• Refer to the section on care
and cleaning of the glass
cooktop on page 77.
• This is normal. The surface may
appear discolored when it is
hot. This is temporary and will
disappear as the glass cools.
Tabla de contenido
