Selecting A Track Directly In The Current Folder; Introduction Of Advanced Built-In Cd Player (Mp3/Wma/Wav) Operation - Pioneer DEH-P80MP Manual De Instrucciones

Section
07 MP3/WMA/WAV Player
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! If the inserted disc contains no files that can
be played back, No Audio is displayed.
! If the inserted disc contains WMA files that
are protected by digital rights management
(DRM) , TRK SKIPPED is displayed while the
protected file is skipped.
! If all the files on the inserted disc are secured
by DRM, PROTECT is displayed.
! There is no sound on fast forward or re-
verse.
Selecting a track directly in
the current folder
When using the remote control, you can select
a track directly by entering the desired track
number.
! You cannot operate this mode from func-
tion display.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
30
En
Introduction of advanced
built-in CD player (MP3/
WMA/WAV) operation
1 Function display
Shows the function status.
1 Press Multi-Control to display the main
menu.
FUNCTION and AUDIO appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
Repeat (repeat play)Random (random play)
Scan (scan play)Pause (pause)FF/REV
(search method)Tag Read (tag display)
COMP/BMX (compression and BMX)
# You can also switch between the functions in
the reverse order by turning Multi-Control coun-
terclockwise.
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
1