Fit The Receiver Collar On Your Pet - Petsafe PWF17-15853 Manual De Funcionamiento

3. Hold the Receiver Collar at the approximate height
of your pet's neck (3B). Start outside of the range
and walk slowly toward the Barrier Transmitter. As
you reach the Barrier Area, the Receiver Collar
emits a series of high-pitched tones. For each tone
you hear, you should notice the Test Light flashing
which indicates that a Progressive Static Stimulation
is being delivered. The Receiver Collar's tone is
easily heard by pets but may be at a volume level
difficult for some humans to hear.
4. Check the range of the Barrier Area from
multiple angles to ensure you are getting the
desired coverage.
Note: Should you find that you are not getting the desired range at the maximum setting,
move the Barrier Transmitter 30 cm, or change from its standing-on-end position to
laying flat. Metal objects can alter the magnetic field and change the transmitting signal
range. The effect on the range depends on the size and shape of the objects. Signal
range can be reduced if the Barrier Transmitter is placed on a concrete floor, due to
steel reinforcement in the concrete. For best range results, place the Barrier Transmitter
on a nonconductive surface (i.e., wood floor or table). Placing the Barrier Transmitter
beneath sofas and beds can reduce the range due to the metal springs altering the
magnetic field.
STEP 4

Fit the Receiver Collar on Your Pet

Important: Proper fit and placement of your Receiver Collar is necessary for effective
operation. The Contact Points must have direct contact with your pet's skin on the
underside of his neck.
8
www.petsafe.net
3B