Receiver Collar Batteries - Petsafe PWF17-15853 Manual De Funcionamiento

Receiver Collar Batteries

The PetSafe Pawz Away
®
two 3-volt lithium coin cell batteries, size CR2032.
Replacement batteries can be found at many
retailers or through the Customer Care Centre. Visit
our web site at www.petsafe.net to locate a retailer
near you.
Replace the Batteries:
1. Using the edge of the Test Light Tool, turn the
battery door to the OPEN ( ) position.
2. Lift the battery door out and turn the door over.
The two 3-volt lithium coin cell batteries are
stored inside the door.
3. Remove the old batteries and insert new
batteries with the positive (+) side facing the
battery door.
4. Insert battery door back into the Receiver
Collar and turn to either the OFF (O) or ON (l)
position to lock the door in place.
Battery life will vary depending on how often
your pet tests the system and receives a Static
Stimulation. Check the Receiver Collar and Barrier
Transmitter every month to ensure the system is working properly. To prolong battery
life, it is recommended that you turn the Receiver Collar and Barrier Transmitter OFF (O)
when not in use.
Receiver Collar uses
™
www.petsafe.net
On/Off Dial
Open
Battery
11