Philips Lumea BRI858 Manual De Instrucciones página 24

24
English
to select the light intensity setting as you find
comfortable.
1 Press the on/off button to turn on the device.
2 Select the desired light intensity setting.
Lumea gives you the freedom to select the light
intensity that you find most convenient. Consult
the table below to set the light intensity setting.
This table shows settings that for the majority of
users provide a comfortable, but still effective
setting. To adjust the light intensity setting, press
the on/off button one or more times until you have
reached the required setting. The corresponding
intensity light level lights up green. You can change
the setting at all times.
The more advanced models
(BRI862/BRI863/BRI864) have a setting advice
feature, called SmartSkin sensor. The sensor
advices the best setting for your skin tone, any
time you want.
a. The setting advice starts automatically, indicated
by the setting lights moving from left to right.
b. Press the device to your skin to get the advice
on the light intensity.
c. After the device scanned your skin, the
suggested intensity lights will blink green to
indicate which intensities you can use based on
your skin tone.
d. Press the on/off button again to confirm that
you want to use the suggested setting advice to
start using the device.
Philips Lumea will automatically use the highest
suggested intensity, indicated by a continuous
green light.