Denon 5900 Instrucciones De Operación página 49

Select the memory using the 2 cursor buttons (
) and press the ENTER button.
1
IMAGE QUALITY ADJUSTMENT 1
This permits adjustment of the contrast,
brightness, sharpness, tint, and enhancer. /
Advance to Operation 3.
IMAGE QUALITY ADJUSTMENT 2
This permits adjustment of the setup level, black
level, white level, color density, chroma delay, and
fresh color. / Advance to Operation 4.
2
NOISE REDUCTION (ADJUSTMENT 3)
The following types of noise reduction can be
adjusted: 3D NR (3D noise reduction), BLNR
(block noise reduction), MQNR (mosquito noise
reduction), and CCS (cross color suppression). /
Advance to Operation 5.
GAMMA CORRECTION
This is selected when dark portions of the image
are obscure, or bright portions are much brighter
than necessary. / Advance to Operation 6.
When Image Quality Adjustment 1 Is Selected and
Adjusted:
• Press cursor button (ª), then select the image
quality adjustment item with cursor buttons (
), set the adjustment value with cursor buttons
1
(•, ª), and press the ENTER button.
• All of the adjusted contents will be stored.
CONTRAST (–6 to +6) (Factory default: 0)
• This adjusts the light/dark difference of the image.
BRIGHTNESS (0 to +12) (Factory default: 0)
• This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
3
• This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (High) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
high frequencies. (Only effective for progressive
images.)
HUE (–6 to +6) (Factory default: 0)
• This adjusts the balance between green and red.
(Not effective for progressive scan output nor
component output.)
ENHANCER (0 to +7) (Factory default: 0)
This emphasizes the contour of the image.
When Image Quality Adjustment 2 Is Selected and
Adjusted:
BLACK LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the black level.
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
4
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal and
the color signal of the image. (Only effective for
progressive images.)
0 ,
Remote control unit
ENTER
Remote control unit
0 ,
Remote control unit
ENTER
Remote control unit
Remote control unit
ENTER
Remote control unit
1 2 3
MEMORY 1
M H
0 0 0 0 0
1 2 3
MEMORY 1
M H
0 0 0 0 0
1 2 3
MEMORY 1
0 -2 -6 -6
ENGLISH
0
0
49