Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Analog Outputs Expansion Module - EAN2
1.3 PRELIMINARY RECOMMENDATIONS
DANGER!
Only trained personnel, with proper qualifications, and familiar with the SCA06 servo
drive and associated machinery shall plan and implent the installation, starting,
operation, and maintenance of this equipment.
The personnel shall follow all the safety instructions described in this manual and/or
defined by the local regulations.
Failure to comply with the safety instructions may result in death, serious injury, and
equipment damage.
DANGER!
Seulement personnes avec la qualification adéquate et familiarisation avec le SCA06
et équipements associés doivent planifiquer ou implementer l'installation, mise en
marche, operation et entretien de cet équipement.
Cettes personnes doivent suivre toutes les instructions de sécurités indiquées dans
ce manuel, et/ou définies par normes locales.
L'inobservance des instructions de sécurité peut résulter en risque de vie et/ou
dommages de cet équipement.
NOTE!
For the purposes of this guide, qualified personnel are those trained to be able to:
1. Install, ground, energize and operate the product according to this guide and the
effective legal safety procedures.
2. Use protective equipment according to the established standards.
3. Give first aid services.
DANGER!
Always disconnect the main power supply before touching any electrical device
associated with the servo drive.
Several components may remain charged with high voltage and/or in movement (fans),
even after the AC power supply has been disconnected or turned off.
Wait at least 10 minutes to guarantee the fully discharge of capacitors.
Always connect the equipment frame to the ground protection (PE).
6 | SCA06
Tabla de contenido
