Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW100 Guía De Instalación, Configuración Y Operación

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

Only use the Flash memory module CFW100-MMF on
WEG CFW100 series inverters.
NOTE!
It is recommended reading the CFW100
„
user's manual before installing or operating
this accessory.
The content of this guide provides important
„
information for the full understanding and
proper operation of the CFW100-MMF.
NOTE!
In order to check the firmware version of
„
this accessory, press and hold the ESC
key for over three seconds.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting this accessory
to the CFW100 frequency inverter.
Wait for at least ten minutes for the full
„
discharge of the inverter.

2 GENERAL INFORMATION

This guide provides directions for the installation,
configuration and operation of the CFW100-MMF Flash
memory. This accessory enables the data transfer, that
is, the inverter parameter table.
Flash Memory Module
CFW100 | 5