Oase ProfiClear Premium Instrucciones De Uso página 53

Pump fed system
How to proceed:
13.
1. Close the slide valve for the dirt outlet at the bottom of the container.
2. Check that the entire filter system (pipes and hoses) is complete.
3. Remove the container cover.
4. Manually turn the filter drum for one whole rotation to ensure unobstructed movement.
5. Fill the filter half full with water (dry run protection of the rinsing pump).
6. Fit the container cover.
The filter motor is stopped for safety reasons if the container cover is lifted.
−
7. Switch on the control system and perform any necessary adjustments. (
8. Switch on the filter pumps and UVC clarifying unit (if applicable).
Ensure that the water is returned to the pond via the return pipe.
−
9. Check all pipes, hoses and their connections for leaks.
Expansion seals may leak initially until they have fully expanded on contact with water.
−
10. Adjust the level detection device, if necessary. (
If using filter starters (e.g. OASE BioKick), do not operate any UVC clarifying units for at least 24 hours
so as not to disturb the colonisation of the filter media by micro-organisms.
Operation)
Adjusting the level detection device)
- GB -
53