ELICA diamond 604 Montaje Y Modo De Empleo página 22

"Lock" Function
The Lock function is used to prevent accidentally turning on
the hob.
Activation:
• remove any pans from the hob
• simultaneously press and hold the Timer Function (2)
and the Pre-set operating level (power) selector (4)
• then again the Timer Function (2);
a double buzzer indicates that the function is active,
''
and
'' is shown on display (5).
Deactivation:
. • simultaneously press and hold the Timer Function (2)
and the Pre-set operating level (power) selector (4)
• then again the Pre-set operating level (power) selector
(4);
a double buzzer indicates that the function is deactivated,
the " "disappears from display (5).
Temporary deactivation: it is possible to use one cooking
zone even with the Lock Function activated.
Proceed as follows:
• press and hold the Timer Function (2) + Power level
selector (4) for more than 2 seconds.
You can now use the hob normally, the "Lock" Function
reactivates when the hob turns off.
Pre-set operating level (power)
• Select the desired cooking zone (3).
• Press the Pre-set operating level (power) selector (4)
once or repeatedly to select the most appropriate level
from those available:
−
* See the table "Pre-set operating level (power)" at the
end of this chapter.
• Press again to switch-off.
22
Melting*
Warming*
Simmer*