To Replace The Headlights; To Tilt The Seat Forward; To Remove And Install The Servicing Plug - Husqvarna P 535HX Manual De Usuario

To remove the transmission cover
1. Remove the screws.
2. Lift and remove the transmission cover.

To tilt the seat forward

• Pull the locking lever up and tilt the seat forward.
To remove and install the servicing
plug
1. Tilt the seat forward. Refer to
on page 46 .
2. Turn the servicing plug counterclockwise to remove
it.
3. Put the servicing plug in position and turn it
clockwise to install it.
46
To tilt the seat forward

To replace the headlights

1. Remove the front cover of the steering column.
To remove and install the front cover of the
Refer to
steering column on page 44 .
2. Remove the 3 screws of the headlights.
3. Remove the headlights.
4. Assemble in opposite sequence.
Fuses
To replace a blade fuse
A broken blade fuse is identified by a burned fuse wire.
1. Pull out the blade fuse from the holder.
2. Replace the broken blade fuse with a new blade fuse
of the same type.
Note:
If the blade fuse breaks again a short period
after you replace it, there is a short circuit. Repair the
short circuit before you operate the product again. Let
an approved service agent help you.
To replace a bolt-down fuse
A broken bolt-down fuse is identified by a burned fuse
wire.
1. Turn the main switch to OFF.
WARNING:
no voltage before you touch the bolt-
down fuse. To touch a bolt-down fuse
with voltage can result in electrical shock
and serious injury.
2. Remove the 2 screws and the bolt down fuse from
the holder.
3. Replace the broken bolt down fuse with a new bolt
down fuse of the same type.
Note:
If the bolt-down fuse breaks again a short
period after you replace it, there is a short circuit. Repair
the short circuit before you operate the product again.
Let an approved service agent help you.
Make sure that there is
1591 - 001 - 21.12.2020