To Adjust The Pto-Belts; To Do A Check Of The Coolant Level; Tire Pressure - Husqvarna P 535HX Manual De Usuario

2. Turn the hydraulic oil filter counterclockwise to
remove it.
3. Install a new hydraulic oil filter in opposite sequence
and fill the hydraulic system. Refer to
hydraulic system on page 50 .

To adjust the PTO-belts

1. Release the lock nut (A).
2. Tighten the adjustment screw (B) until the sleeve (C)
cannot be rotated by hand.
3. Hold the adjustment screw (B) and tighten the lock
nut (A).
A
C

To do a check of the coolant level

1. Park the product on level ground and stop the
engine.
2. Open the engine cover. Refer to
remove the engine cover on page 45 .
3. Open the coolant cap.
1591 - 001 - 21.12.2020
To fill the
B
To open and
4. Do a check of the coolant level. Fill the coolant tank
if it is necessary. Refer to
64 .
5. Do a check of the coolant level in the expansion
tank. The minimum level must be at the LOW mark.

Tire pressure

Technical data on page 64 for the correct tire
Refer to
pressure.
Technical data on page
51