Double Pumping - Philips AVENT Naturally ISIS iQ DUO Guía De Inicio Rápida

Connecting the Electronics of ISIS iQ DUO
Parts you will need for this step:
assembled
pump body
(see pages 9-10)
control
cable
transparent tubing
wall plug cord
First (Control) Pump
First (Control) Pump
Control Cable
Socket
Transparent
Tubing Port
11
Need Help? Call us at 1.800.54.AVENT or visit www.aventamerica.com
™

Double Pumping?

double pumping
connector
control handle
pump motor
electric
adaptor
See section titled, ISIS iQ DUOPump Parts
Guide on page 1 for a description of First
(Control) Pump and Second Pump.
Push the control handle onto the
1
assembled pump body so that it sits
firmly on top of the silicone diaphragm.
This assembly becomes the First (Control)
Pump which contains the electronics
of the pump.
2
Click the control cable into the socket
on the control handle.
Then securely attach one of the
transparent tubes to the port on
the control handle.
Connecting the Electronics of ISIS iQ DUO
Double pumping? Complete the next step
with your second assembled pump body.
See section titled, ISIS iQ DUO Pump Parts Guide
on page 1 for a description of First (Control) Pump
and Second Pump
Push the double pumping connector onto the
3a
pump body so that it sits firmly on top of the
silicone diaphragm. Securely attach the other
transparent tube to the double pumping
connector. When ISIS iQ DUO is fully assembled,
the Second Pump will mimic simultaneously the
speed and suction of the First (Control) Pump.
Single pumping? Complete the next step
with the remaining tube.
If you are single pumping, you can keep
3b
the transparent tube out of the way by
attaching it to the white clip.
Securely attach the twin tubing
4
to the ports on the pump motor.
Connect the control cable
into the adjacent socket.
5
Connect the electric adaptor to power socket
on the pump motor.
Then connect the wall plug cord to the electric
adaptor and insert the plug into the wall outlet.
™
Second Pump
Twin Tubing
Port
Control Cable
Socket
12