Sample Layouts; Double Loop - Petsafe Deluxe PCF-1000-20 Manual De Funcionamiento

Sample Layouts

Double Loop

A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property.
When using a Double Loop, the Boundary Wire must be separated by a minimum of 1 TO 1.5 METERS
(3 TO 5 FEET) to avoid canceling the signal. Remember that a Double Loop will require twice as much wire.
1-1.5 m
(3-5 ft)
C
A
B
A
B
C
Sample 3 (2F): Front or Back
Yard Only (Double Loop)
From the Fence Transmitter, run
the wire to A, A to B, B to C, C
to D, D to E, E to F, make a
U-turn and follow your path all
the way back to A,
wire separated 1 to 1.5 meters
(3 to 5 feet). Twist the wire from
A back to the Fence Transmitter.
6
Sample 1:
Perimeter Loop
(Single Loop)
The Perimeter
Loop is the
most common
layout. This will
allow your cat to
freely and safely
roam your entire
property (2C). It
can also protect
gardens and
landscaping (2D).
D
E
F
E
F
D
1-1.5 m
(3-5 ft)
Sample 4 (2G):
Front Boundary Only
(Double Loop)
From the Fence Transmitter,
run the wire to
back to A keeping the wire
keeping the separated 1 to 1.5 meters
(3 to 5 feet). Twist the wire
from A back to the Fence
Transmitter.
www.petsafe.net
Sample 2 (2E): Perimeter Loop Using Existing
Fence (Single Loop)
This layout allows you to include your existing fence as
part of your layout and keep your cat from jumping out or
digging under your existing fence. It reduces the amount
of wire which will need to be buried.
Transmitter, run the wire to D to E, E to A, twist the wires from A back to the Fence
Transmitter. See the "Install the Boundary Wire" section
for more information on attaching the wire to a fence.
B
1-1.5 m
A
(3-5 ft)
A, A to B, B
From the Fence
A, A to B, B to C, C to D,
E
1-1.5 m
(3-5 ft)
B
D
A
C
Sample 5 (2H): Lake Access
(Double Loop)
From the Fence Transmitter,
run the wire to A, A to B,
make a U-turn and go to C, C
to D, D to E, make a U-turn
and follow your path all the
way back to A keeping wire
separated 1 to 1.5 meters
(3 to 5 feet). Twist the wire
from A back to the Fence
Transmitter.