Leggere attentamente le istruzioni prima di iniziare
l'installazione.
I dettagli nell'immagine contenuta in queste istruzioni
possono essere diversi dal modello con cui si lavora.
Le immagini ricorrono in vari fogli di istruzioni pertanto
possono variare fra i diversi modelli di motore. Le
informazioni basilari sono però corrette.
Il presente kit contiene:
Denominazione
Power take-off
O-ring
Flange screw, M10X30*
Installation instructions
* delivered with engine
NOTE! Use screws (3) delivered with engine.
Installation of the Power Take-Off unit
1. Unscrew the 2 screws (3) and put the screws
aside for later use. Remove the protection screen
(A). Remove the O-ring (B). See fig 1.
2. Mount the O-ring (2) on the PTO-unit.
See figure 2.
3. Mount the PTO-unit using the existing screws (3).
Tighten the screws.
Tightening torque 48±8 (35.5±6 lbf ft)
NOTE! The product, Power take-off / PTO SAE A
is manufactured according to the standard SAE A.
The product is intended for installations covered by
the mentioned standard.
Quantità Pos. in fig.
1
1
1
2
2
3
1
-
Läs igenom hela anvisningen innan arbetet
påbörjas.
Detaljer på bilder i denna instruktion kan skilja från
den modellen ni arbetar med. Bilderna återanvänds
i olika instruktioner och kan därför variera mellan
olika motormodeller. Den väsentliga informationen
är korrekt.
Den här satsen innehåller:
Beteckning
Power take-off
O-ring
Flange screw, M10X30*
Installation instructions
* delivered with engine
NOTE! Use screws (3) delivered with engine.
Installation of the Power Take-Off unit
1. Unscrew the 2 screws (3) and put the screws
aside for later use. Remove the protection screen
(A). Remove the O-ring (B). See fig 1.
2. Mount the O-ring (2) on the PTO-unit.
See figure 2.
3. Mount the PTO-unit using the existing screws (3).
Tighten the screws.
Tightening torque 48±8 (35.5±6 lbf ft)
NOTE! The product, Power take-off / PTO SAE A
is manufactured according to the standard SAE A.
The product is intended for installations covered by
the mentioned standard.
Antal
Pos. i bild
1
1
1
2
2
3
1
-
