Maintenance Intervals; Filter Cleaning - Stanley Bostitch GFN1564K Manual De Instrucciones

Depending on the conditions at the workplace and the
© Stanley Bostitch
form of the work piece, individual noise attenuation
measures may need to be carried out, such as placing
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
work pieces on sound damping supports, preventing
compliance for the products.
work piece vibration by means of clamping or covering,
adjusting to the minimum air pressure required for the
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
job, etc.
rien que les produits soient conformes aux normes CE.
INFORMATION ON VIBRATION (see Tool Technical
Data)
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
The characteristic vibration value for the tool has been
determined in accordance with ISO/WD 8662-11
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
"Measurement of vibration in hand held power tools -
zeggen dat de producten voldoen aan de CE-vereisten.
Part 11 Fastener Driving Tools".
This value is a tool related characteristic and does not
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
represent the influence on the hand-arm system when
produkterne.
using the tool. An influence on the hand-arm system
when using the tool will depend for example on the
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
gripping force, the contact force, the working direction,
yhdenmukaisuutta.
the adjustment of the compressed air supply, the work
piece, the work piece support, etc.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος

MAINTENANCE INTERVALS

εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
Maintenance intervals for the tools can vary depending
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
upon the environment the tool is being operated in, the
conformità CE per i relativi prodotti.
application it is being used for and the volume of nails
that are being driven. For example, if it is being used in
dirty and dusty conditions for high volume nailing,
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
maintenance will be required more regularly rather than
merking for produktet.
in clean conditions with low volumes of nails.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
The chart that follows has been produced as a guide to
conformidade com a CE para os produtos.
help you establish the maintenance intervals for the
tools. If you experience an excessive build up of debris
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
within the tool between cleans, reduce the maintenance
conformidad con las normas CE de los productos.
intervals. If the tool does not require cleaning within the
schedule you have established, then you may be able to
extend the maintenance intervals. If you have any
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
questions regarding the above please contact your local
conformidad con las normas CE de los productos.
distributor for help and advice.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
Maintenance Intervals GFN1664K / GFN1564K /
stanowią deklaracji zgodności CE prezentowanych produktów.
GBT1850K:
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
Very dirty & dusty 6-7
Dusty 10-14 10-14
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
Moderate 30-45 30-45
Clean 45-60 45-60
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
1
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
Number of Days Between
Maintenance Operations
6-7 6-7 3-4
10-14 6-7
30-45 10-14
45-60 30-45
2
4
6
Weekly Nail Usage [x1000]

FILTER CLEANING

The references for this are supplied on the seperate
sheet 'Filter Cleaning / Tool Cleaning & Lubrication
Guide' for easy reference.
When working on the tools, do not lose any parts of the
disassembled tool and use only genuine Stanley Bostitch
parts to ensure proper tool operation and safety.
1. Before cleaning, check that the tool has cooled
down completely, and then remove all nails, the fuel
cell and the battery from the tool. (Fig. 30)
2. Detach the filter cover. (Fig. 31)
3. Remove the filter from the top cover. (Fig. 32)
4. Remove the dust and rubbish from the filter with the
genuine Stanley Bostitch cleaner [SB-TC1]. (Fig. 33)
5. Confirm that the filter is not damaged. If damaged,
replace the filter with a new one [Part No. 192231].
Ensure that the filter is dry and free from
contamination. Replace the filter. (Fig. 34)
6. Restore the filter cover ensuring that the filter is not
caught. (Fig. 35)
7. Always carry out 6-10 test cycles on an off-cut of
timber before using on a finished surface, as
cleaning residue may be expelled. (Fig.36)
CLEANING & LUBRICATION
Make sure that you have read and understood all safety
warnings and cleaning procedures before attempting to
operate or clean this tool. Failure to do so may result in
serious injury.
WARNING: Make sure that the 4 hex socket head bolts
are securely attached to the cylinder head before
operating the tool. Loose or missing bolts may cause
leakage of burning gases causing injury to the user and
damage to the tool and property.
1. Before cleaning, check that the tool has cooled
down completely, and then remove all nails, the fuel
cell and the battery from the tool. (Fig. 37)
2. Detach the filter cover. (Fig. 38)
3-4
3. Using 5mm hex keys, remove and retain the hex
socket head bolt. (Fig. 39 & 40) [M5 x 10] [M5
6-7
Shoulder 2pcs.]
10-14
4. Detach the top cover. (Fig. 41)
30-45
5. Using a screwdriver, remove and retain the screw.
8+
(Fig. 42)[M4 x 10]
6. Remove the support (B) from the motor lead. (Fig.
43) Carefully disconnect the motor lead. (Fig. 44)