Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GLOSSARY OF TERMS
Activate (operating controls)
To move an operating control so that it is in a position
that allows the tool to be actuated or that satisfies one
requirement for the tool to be actuated.
Actuate (tool)
To cause movement of the tool component(s) intended to
drive a fastener.
Air inlet port
In an air tool, the opening to which the compressed air supply
is connected, usually by means of a threaded fitting.
Dual actuation trigger system
An actuation system in which there are two triggers that must
be pulled in a specific sequence in order to drive a fastener.
Fastener
A staple, pin, brad, nail, or other fastening device which is
designed and manufactured for use in the tools within the
scope of this standard.
FEATURES
PRODUCT SPECIFICATIONS
Operating Pressure............................................. 70-100 psi
Magazine Capacity ........................................130 Fasteners
Fastener size range ...................................1/2 in. - 1-3/8 in.
Fastener gauge type ...................... 23 gauge headless pins
ASSEMBLY
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled or with damaged or missing
parts could result in serious personal injury.
If any parts are damaged or missing, please call 1-866-539-1710 for assistance.
Jam
An obstruction in the feed or drive areas of the tool.
Maximum air pressure
The maximum allowable pressure of the compressed air, as
specified by the manufacturer, for operating a tool.
Nose
The part of the tool that is placed against the workpiece for
placement of the fastener.
Operating control
A control that separately, or as part of an actuation system,
can cause the actuation of a tool.
Trigger
A tool operating control activated by a tool operator's fingers.
Workpiece
The intended object into which a fastener is to be driven
by a tool.
Air Consumption.......................... 0.032 ft
Air Inlet .............................................................. 1/4 in. NPT
Weighted sound impulse power level ....................99.7 dBA
Emission sound pressure level ..............................90.5 dBA
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
6 – English
/cycle at 100 psi
3
Tabla de contenido
Solución de problemas
