Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SERVICE
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.porter-cable.com. You can also order parts from
your nearest factory-owned branch, or by calling our Customer Care Center at 1-888-848-5175 to receive personalized support from highly-trained
technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For
information about Porter-Cable, its
factory-owned branches, or an Authorized Warranty Service Center, visit our website at www.porter-cable. com or
call our Customer Care Center at (888)-848-5175. All repairs made by our service centers are fully guaranteed against
defective material and workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305 -
Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number,
type, serial number, etc.).
ACCESSORIES
A complete line of accessories is available from your Porter-Cable•Delta Supplier, Porter-Cable•Delta Factory Service
Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable. com for a catalog
or for the name of your nearest supplier.
Since accessories other than those offered by Porter-Cable•Delta have not been tested with
this product, use of such accessories could be hazardous. For safest operation, only Porter-Cable•Delta
recommended accessories should be used with this product.
Do not use a "wobble" dado blade, or a dado blade larger than 6" in diameter.
CONSTRUCTING A FEATHERBOARD
Featherboards are used to keep the work in contact with the fence and table and help prevent kickback. Follow the
dimensions in Fig. 55 to make a featherboard. Use wood that is straight and free of knots and cracks. Clamp the
featherboard to the fence and the table so that the leading edge of the featherboard can support the workpiece until
the cut is complete. Use a featherboard for all non-through-sawing operations with the guard and spreader assembly
removed (see Fig. 56). Always replace the guard and spreader assembly when the non-thru-sawing operation is
complete.
Fig. 51
Fig. 52
21
Tabla de contenido
