Operating Guide; Prepare The Handheld Transmitter - Petsafe VT-800 Manual De Funcionamiento

Red LED: Indicates when Vibration Stimulation is being delivered
and serves as the low battery indicator. Also indicates when the
unit is charging.
Green LED: Indicates unit is on and battery is good. Also
indicates Pairing Mode.
Collar Strap Retainers: Hold the adjustable collar.
Charging Jack & Dust Cover: Used to charge the Receiver
Collar. Although the Receiver Collar is waterproof without the
charger cover, keep the cover in place when not charging to keep
debris out of the opening.

OPERATING GuIDE

STEP 1

Prepare the Handheld Transmitter

Charge the Handheld Transmitter
1. Lift the rubber dust cover protecting the Handheld Transmitter
Charging Jack.
2. Connect one of the charger connectors to the Handheld
Transmitter Charging Jack (1A).
3. Plug the charger into a
standard wall outlet. The Red
LED will light up. When fully
charged, the LED will change
to Green.
4. When charging is complete,
replace the rubber dust cover.
Note: Approximate battery life
between charges is 40 to 60
hours, depending on frequency
of use.
1A
www.petsafe.net 9