Netmaster Card Control - Alliance Laundry Systems T433I Operación / Mantenimiento / Programación

NetMaster Card Control

1. Select HIGH TEMP, MED TEMP, LOW TEMP,
or NO HEAT by pressing the appropriate
temperature pad.
2. Insert card into opening. DO NOT remove the
card until "REMOVE CARD" LED is lit.
3. Press START pad to start tumbler.
To stop the tumbler at any time during the cycle,
OPEN DOOR. To restart the tumbler, CLOSE
door and press START pad.
M414462 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 5
To reduce the risk of bodily injury, the
tumbler stops tumbling when the door is
opened. Do not use the tumbler if it does
not stop tumbling when the door is opened
or starts tumbling without pressing the
START pad. Remove the tumbler from use
and call for service.
4. When the cycle is complete, open door and
remove the laundry.
Operating Instructions
WARNING
C852I
W078
15