Before You Call For Service - Alliance Laundry Systems T433I Operación / Mantenimiento / Programación

Before You Call for Service

IMPORTANT: All tumbler panels must be in place
for proper operation.
You may save time and money by checking the
following:
If the Tumbler:
Won't Won't
Start Heat
•
•
•
•
•
•
•
•
•
•
•
•
•
M414462
Clothes
Not Dry
Insert coin(s). (Coin Drop Models Only)
Close the loading door tightly.
Press the PUSH TO START button.
Be sure power cord is plugged all the way into the electrical outlet.
Drying timer is in OFF position.
Check the main fuse and circuit breaker.
Insufficient air flow.
Gas shut-off valve in OFF position.
Are controls properly set?
Broken drive belt. Call the service person.
Tumbler is in Cool Down Mode.
•
Lint screen clogged. Clean lint screen.
•
Exhaust duct to outside is blocked. Clean out.
•
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Possible Reason – Do This to Correct
31