Electronic Coin Control - Alliance Laundry Systems T433I Operación / Mantenimiento / Programación

Electronic Coin Control

1. Select HIGH TEMP, MED TEMP, LOW TEMP,
or NO HEAT by pressing the appropriate
temperature pad.
2. Insert the coin(s) in the coin slot.
3. Press START pad to start tumbler.
To stop the tumbler at any time during the cycle,
OPEN DOOR. To restart the tumbler, CLOSE
door and press START pad.
M414462
1 2 3
SELECT INSERT PUSH
TEMP COIN START
HIGH
START
TEMP
MED
TEMP
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
LOW
TEMP
NO
HEAT
Figure 8
To reduce the risk of bodily injury, the
tumbler stops tumbling when the door is
opened. Do not use the tumbler if it does
not stop tumbling when the door is opened
or starts tumbling without pressing the
START pad. Remove the tumbler from use
and call for service.
4. When the cycle is complete, open door and
remove the laundry.
Operating Instructions
25
C
T361I
WARNING
T361I
W078
17