Manual Timer Tumblers - Alliance Laundry Systems T433I Operación / Mantenimiento / Programación

Operating Instructions
1
0
60
10
50
20
HEAT
40
30
PUSH
TO
START
4
25, 30 AND 35 POUND TUMBLERS
HIGH
190
TEMPERATURE

Manual Timer Tumblers

1. Set the TEMPERATURE selector at HIGH,
MEDIUM, LOW or anywhere between these
settings.
2. Set the HEAT/DRYING timer for the number of
minutes (from 0-60) desired.
3. Set the COOL DOWN/COOLING timer for the
number of minutes (from 0-15) desired.
4. Press the PUSH TO START button in and hold it
in for approximately three seconds. This starts
the tumbler cycle.
IMPORTANT: If the cylinder is opened during the
cycle, the heating system will shut off and the
motor will stop. To restart the cycle, door must be
closed and the PUSH TO START button must be
pressed in.
12
2
0
15
5
COOL
DOWN
10
HIGH
LOW
3
LOAD LOW AIR
READY FLOW
LOW
130
NON
REV
MEDIUM
REV
160
120 AND 170 POUND TUMBLERS
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
HIGH
COTTON
MEDIUM
MIXED
TEMPERATURE
PUSH TO START
TMB47N
COOLING
PUSH
TO
START
10
Figure 2
To reduce the risk of bodily injury, the
tumbler stops tumbling when the door is
opened. Do not use the tumbler if it does
not stop tumbling when the door is opened
or starts tumbling without pressing the
START pad. Remove the tumbler from use
and call for service.
5. When the cycle is complete, open door and
remove the laundry
LOW
COOLING
PERM
PRESS
10
15 40
0
30
5
50/75 POUND TUMBLERS
DRYING
50
15 40 60
0
0
30
10
5
20
WARNING
DRYING
50
60
0
10
20
TMB48N
TMB49N
W078
M414462