Operating The Mixer - Hamilton Beach HMD900-CE Manual De Uso

Operating the Mixer

Electrical Requirements
wWARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Depending on the model of your mixer, the plug will look like the following to meet power requirements:
120 VAC, 60 Hz
Observe all governing codes and ordinances.
A fused electrical supply is required. (A time-delay
fuse is recommended.) It is recommended that
a separate circuit serving only this appliance be
provided.
If you decide to use an optional foot pedal (avail-
able on 120V Model Only), plug the mixer into
the foot pedal socket; then plug the foot pedal into
an appropriate electrical supply (described above)
and push the START-STOP button on the mixer
to turn on.
Foot Pedal Socket
4
wWARNING
Agitator can cause glass mixing containers to
break.
Always use collar when operating with paper cup.
Always use shield when mixing.
Do not put spoon or other utensils in cup when
mixing.
Failure to follow these instructions can result
in broken bones or cuts.
UK 230 VAC, 50 Hz
Mixing Containers
For mixing and sanitizing, it is recommended to
use the Hamilton Beach Stainless Steel Universal
Container, #110E.
Mixing Soft-Serve Drink/Dessert
The amount of time required for mixing will depend on
the temperature of the soft-serve, overrun %, and the
type of flavoring ingredients.
A basic soft-serve mix recipe follows:
• 8–10 ounces of soft-serve
• 1 ⁄ ounces flavoring ingredients
1
3
Mixing Hard Ice Cream
The Model HDM900-CE can also handle mixing hard
ice cream and mix-ins. A basic recipe follows:
• 1 ⁄ cup cookies or candies, or other mix-ins
4
• Four rounded scoops, or approximately 12 ounces,
of hard ice cream
• 1 ⁄ cup milk
3
Place mix-ins in container first. Add ice cream and milk.
Mixing time will depend on the consistency of the ice cream.
Cut Hazard
230 VAC, 50 Hz