Other Functions; Using Optional Equipment; Auxiliary Audio Equipment - Sony CDX-GT65UIW Manual De Instrucciones

SOUND SYNC
Selects the color with sound synchronization:
"ON," "OFF."
WHITE MENU
Sets the effect when the source is switched:
"ON," "OFF."
START WHITE
Sets the start up color: "ON," "OFF."
MOTION DSPL (Motion Display)
– "SA": to show moving patterns and spectrum
analyzer.
– "ON": to show moving patterns.
– "OFF": to deactivate the Motion Display.
AUTO SCROLL
Scrolls long items automatically: "ON," "OFF."
LOCAL (Local Seek Mode)
– "ON": to only tune into stations with stronger
signals.
– "OFF": to tune normal reception.
MONO* 2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFF."
ZAPPIN TIME
Selects the playback time for the ZAPPIN
function.
– "ZAP.TIME-1 (about 6 seconds),"
"ZAP.TIME-2 (about 15 seconds),"
"ZAP.TIME-3 (about 30 seconds)."
ZAPPIN BEEP
Has the beep sound between track passages:
"ON," "OFF."
LPF FREQ (Low Pass Filter Frequency)
Selects the subwoofer cut-off frequency:
"50Hz," "60Hz," "80Hz," "100Hz," "120Hz."
LPF SLOPE (Low Pass Filter Slope)
Selects the LPF slope: "1," "2," "3."
SUBW PHASE (Subwoofer Phase)
Selects the subwoofer phase: "NORM," "REV."
HPF FREQ (High Pass Filter Frequency)
Selects the front/rear speaker cut-off frequency:
"OFF,""50Hz," "60Hz," "80Hz," "100Hz,"
"120Hz."
HPF SLOPE (High Pass Filter Slope)
Selects the HPF slope (effective only when HPF
FREQ is set to other than "OFF"): "1," "2," "3."
LOUDNESS (Dynamic Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
BTM (page 11)
*1 When the unit is turned off.
*2 When FM is received.

Other functions

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
* Be sure to use a straight type plug.
Adjusting the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE/OFF) repeatedly until "AUX"
appears.
After that, "AUX FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 22).
Connecting cord*
(not supplied)
25