Maintenance Schedule; Work To Perform - Seat MÓ Manual De Instrucciones

Maintenance

Maintenance schedule

Work to perform

As with any other vehicle on the road, regu-
lar maintenance and inspection is required
before each use.
This is the only way to ensure the safety of
the driver and other road users, while also
guaranteeing an optimal experience with the
eScooter.
Always take your eScooter to a SEAT Official
Service Centre for maintenance work, as
they know your eScooter best and have the
right tools to diagnose and repair it.
However, there are some things you can (and
should) check yourself, such as tyre pressure,
brake fluid, etc.
Maintenance schedule
36
¬ WARNING
•
These instructions have been written on
the assumption that the eScooter is used
exclusively in an urban environment. If you
will use it for a purpose other than that for
which it was intended or drive steadily at
a high speed or in overly damp or dusty
conditions, you will have to service the
eScooter more often.
•
If the eScooter is involved in an accident,
get a SEAT Official Service or a specialist
workshop to inspect the main components.
•
Failure to properly maintain the eScooter,
follow instructions or solve a problem be-
fore driving could cause a serious accident.
Always follow this schedule and any advice
from your SEAT distributor.
•
There are some basic operations you
may be able to do on your own (the same
ones you would do for a eScooter with a
combustion engine, such as changing the
brake pads). Only you can decide if you are
capable and, therefore, whether or not you
should do these tasks yourself.
•
Always read the instructions before
starting and make sure you have all the
materials you need and a clear idea of
what you are going to do.
•
Use the centre stand for any operations,
always on a flat, hard horizontal surface.
•
Always switch the eScooter off and
remove the keys before carrying out any
operations (unless indicated otherwise
in the instructions) to avoid starting it
accidentally and having an accident with
the motor running.
•
Take care with hot parts, particularly the
brake discs if you have been driving your
eScooter recently. Let them cool down first.