General Information; Technical Data; General Safety Regulations - SICE S 560 Manual De Instrucciones

The S 560 tyre changer has been specifically designed to demount and mount truck, bus, tractors and earth moving vehicles tyres, with rims
from 14" to 46" (56" with PA extension) and a maximum 2600 mm diameter.
Any other use is improper and therefore not authorized.
Before beginning any kind of work on or with this machine, carefully read and understand the contents of these operating instructions.
The manufacturer shall not liable for any injury to persons or damage to things caused by improper use of this machine.
KEEP THIS MANUAL NEAR THE MACHINE AND CONSULT IT AS NEEDED DURING OPERATIONS.
Pump motor
Gear-box motor
Handles rim from - to
Max. wheel diameter
Max. wheel width
Max. wheel weight
Wheel lifter cylinder capacity
Weight (with standard accessories)
Acoustic pressure level (at work)
Operators who work with this machine must be qualified and authorized.
To be considered qualified, an operator must understand the written instructions given by the manufacturer, be trained and be familiar with
the regulations governing labour safety.
Operators must not make use of drugs or alcohol which could alter their faculties.
It is, however, essential to:
- Know how to read and understand the descriptions.
- Know the performances and characteristics of this machine.
- Keep unauthorized persons away from the operating zone.
- Make sure that the installation has been made in compliance with all the pertinent regulations and standards in force.
- Make sure that all the operators have been sufficiently trained, that they know how to use the equipment in a correct and safe way and
that there is adequate supervision.
- Never touch the electrical equipment or power lines unless the power has been previously turned off.
- Carefully read this manual and learn how to correctly and safely use the machine.
- Always keep this manual ready to hand in an easily accessible place and consult it when necessary.
WARNING!
Unauthorized variations or modifications to the machine shall relieve the manufacturer from all liability for any
deriving damages or accidents.
In particular, removal or tampering with the safety devices represents a violation of the Labour Safety
regulations.
S 560

1. GENERAL INFORMATION

2. TECHNICAL DATA

3. GENERAL SAFETY REGULATIONS

3,3 - 4,4 kW
1,9 - 2,5 kW
14" - 46" (56" with PA)
2600 mm (103")
1500 mm (59,6")
LpA < 70 dB(A)
34
ENGLISH • Instructions manual
1700 kg
2500 kg
1410 kg