Tecno-gaz Multisteril Fast Instrucciones De Uso página 44

ENGLISH
7.5 Cycle changes
Select the cycle to be modified.
Press OK to display the MENU.
Available parameters:
Description
Standby
Detergent infeed
Heating
Degas function
SWEEP function
Ultrasound cleaning
Drying
Press OK to scroll the cycle parameters.
Press SELECT to modify the value of the selected parameter.
The menu of the parameters and setup scrolls circularly.
Once the setup is completed select EXIT and press
Changes are saved.
7.6 DELAYED START setup:
Hold down START
Press SELECT to scroll values from 1 to 9 hours.
Press START to start the delayed start.
During the waiting time a timer is displayed showing the time remaining before the cycle
start.
WARNING: In case voltage is missing the delayed start is cancelled.
8
Open the water feeding cock. Check the presence of the filter in the tank and make sure it
is clean. Position the item to be cleaned into the TRAY in case of small parts use the
DENTAL BURS TRAY.
Items to be cleaned have to be distributed uniformly and must not touch the tank walls or
bottom.
Fit the tray inside the tank, be sure there is no contact between the tank walls and
the tray.
16
for 8 seconds.
USE INSTRUCTIONS
Parameters
ON - OFF
0 ÷ 6 %
ON - OFF
SI - NO
SI - NO
0 ÷ 30 min
SI - NO
SELECT to quit the MENU.
LIVELLO DI
CARICO MASSIMO
Step
-
1%
-
-
-
1 min
-