Intended Use; Start-Up - RIVIT RIV 760 Instrucciones De Manejo

Remachadora eléctrica
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
CN
BULB-TITE
®
(mm)
4
/
17/26 BT*
5.2
/
17/32 BT*
6.3
/
/
17/42 BT*
7,7
/
17/48 BT*
MEGA
GRIP
®
(mm)
17/31
/ ,
/ ,
4,8
MG*
17/41
/ ,
/ ,
6,4
MG*
*
1.5
190
2953700
5
3555900
4
3585900
2953800
5
2339300
4432300
143 4993
5
3555900
4
143 4865
5
2339300
When not in use, keep the tool in a dry closed room, out of reach of children.
When working with the tool, always carry protection goggles. Personal protection like
clothes, gloves, safety helmet, non slipping shoes, ear protectors and protection against
fall are highly recommended.
3248100
The air inlets for the engine should not be obstructed. Do not introduce anything into
them.
When depositing the tool, make sure that it cannot fall down.
Use only genuine spare parts for repair.
Repair work must be carried out by skilled personal. In case of doubt, always send back
the tool to the manufacturer!
Do not use the tool outside of riveting holes.
The blind rivet could be ejected from the tool. Never turn the tool towards yourself or
towards another person.
Part N° 32 (mandrel container) must be mounted on the tool during operation.
2480500
1 1 .6

Intended use

Engage fully charged battery in correct position into housing.
Select correct nosepiece (according to table 1.4.) and screw into head.
Attention: Do not cover the vent holes and do not obstruct the vent holes.
1.7

Start-Up

Depressing the switch starts the operation.
When releasing the switch the jaw assembly returns to the start position automatically.
Eject the spent mandrel by tilting to the rear into the spent mandrel container or to the
front through the nosepiece.
The riveting tool is equipped with an overload protection. In the event of an overload the
operation will be stopped and the red light shows. Release the switch and the assembly
will return to the start position.
The battery will keep the power relatively stable until a sudden drop-off, resulting in only
2-3 more rivets being set. The jaw mechanism will automatically return to the starting
position when the switch has been released.
GB
23
loading