Tuning In To Categorized Programs; Changing The Display; Checking The Sat Radio Id Number; Storing Channel Presets - Alpine IVA-D106 Manual De Operación

Tuning in to Categorized Programs

Quickly find a group of channels in a desired category. The categories
are listed in the order designated by SIRIUS or XM Radio.
In the XM or SIRIUS mode, touch [
select a desired category.
The first channel of the selected category is tuned.
• If the desired category program is not found, the "--------" is
displayed for 2 seconds, then the receiving program is restored.

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
XM mode:
1
*
Information
display
SIRIUS mode:
1
*
1
* Channel name, category, title name, etc., are displayed in one screen.
2
* If the display of Auxiliary Data Field characters exceeds the screen,
touch [INFO.] to continue the display.
60
-EN
CAT] or [CAT
2
*
Auxiliary Data
Field

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
] to
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12-digit numeric number. It is printed on a label found
on the SAT Receiver.
It can also be displayed on the screen of the IVA-D106 in the following
way.
1
While receiving SAT Radio, touch [
[NO. ] to select channel "0" for XM and channel
"255" for SIRIUS.
The unit display the ID number.
2
The unit displays the ID number.
3
To cancel the ID number display, change the
channel.
• You cannot use "O," "S," " I," or "F" for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.

Storing Channel Presets

1
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3 ).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.

Receiving Stored Channels

1
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has your desired satellite
channel in memory.
NO.] or