Noise/Vibration Information - Skil 9071 Manual De Instrucciones

Tool specifications
Polish
Order number
Voltage
Rated power consumption
Frequency
No-load speed
Grinder spindle thread - Ø
Capacity rubber plate - Ø
Capacity for polishing disc - Ø
Weight (without grinding wheels), aprox.
Protection class
Machine Elements
A Spindle locking button
C Speed selector
D Switch locking button
E On/Off switch
F Auxiliary handle*
G Wool bonnet
H Rubber plate
I Grinder spindle
J Screw
K Auxiliary handle type "D"
L Allen key
Introduction
This power tool was designed to provide the user with a
great diversity of applications like a polish with adjustment
of speed.
▪ The machine can be used only for dry polishing.
Read and save this instruction manual.

Noise/vibration information

Valores de medidas de acordo com EN 60 745-1.
O nível de ruído avaliado A da ferramenta é tipicamente:
Nível de pressão acústica 90 dB (A). Nível de potência
acústica 103 dB (A).
Utilize protetores acústicos!
A aceleração avaliada é tipicamente de 5,5 m/s
General power tool safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
SAVE THESE INSTRUCTIONS
1. Work area safety a) Keep work area clean and well lit. Cluttered and poorly
lit areas can result in accidents.
b) Do not operate power tools in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
SKIL_IB9071_BR.indd 11
9071
F 012 9071
[V] 127 / 220
[W] 1.300
[Hz] 50 / 60
-1
[min ] 600 ... 3.000
M 14
[mm] 180 (7")
[mm] 200
[kg] 3,3
/ II
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
el ectric shock
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not misuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If it is not possible to avoid the use of the power tool
in humid or wet areas, use a residual current device
(RCD)protected supply. Use of an RCD reduces the risk
of electric shock.
g) In case of change need or substitution of the electric
2
.
cable, it should be made by an authorized and
qualified technical service. A damaged cable increases
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while if you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that are switches on invite accidents.
d) Remove any adjusting key or wrench before
switching on the power tool. A wrench or a key left
attached to a rotating part of the power tool may result in
personal injury.
11
30-3-2011 16:04:40