Setting The Alarm Recording Mode - Sony SVT-S168P Manual De Instrucciones

To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.
Setting the Alarm Recording
Mode
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "3" of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The ALARM SET menu appears.
ALARM SET
ALARM MODE
ALARM SPEED
ALARM DURATION
ALARM DATA REC
TAPE END WARN.
CLOG DETECTION
SERIES REC
< >
NEXT PUSH
+ –
SELECT : DATA SET : / RETURN : MENU
4
Set ALARM MODE to A1, A2, A3 or OFF by
pressing MENU + or –.
A (alarm)1: always accepts alarms.
A2: accepts alarms only when timer recording is
proceeding.
A3: accepts alarms only when timer recording is
standby.
OFF: does not accept alarm even if an alarm
signal is received.
5
Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.
A1
3H
20s
OFF
COUNTER
ON
OFF
Notes
• While alarm recording is in progress, other modes are
inoperable.
• After the alarm recording is completed, the VCR returns to
the condition it was in before the alarm signal was
received.
• If an alarm input is received while the VCR is in repeat
recording (see page 20 (GB)), repeat recording stops and
the REPEAT indicator goes out. After the tape reaches the
end, the tape is rewound and the VCR stops. The OFF
indicator lights in the display window (only when
REPEAT 1 is selected for TAPE END MODE in the
GENERAL SET menu).
• When the OFF indicator lights, in order to prevent
accidental erasure of a recorded tape, timer recording and
alarm recording cannot be executed.
If any of REC z, FF M, REW m, PLAY B, STOP x
is pressed, the OFF indicator goes out.
• If another alarm is received while alarm recording is in
progress, the second alarm recording starts and the
recording duration is extended.
• If the power is interrupted while alarm recording is in
progress and restored again, the operation before the alarm
recording was made resumes.
33
(GB)