Corghi A 222 Manual De Uso página 71

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

4. Never exceed the bead setting pressure provided by the
tyre manufacturer, as stated on the sidewall of the tyre.
Carefully monitor the gauge on the air hose.
5. If tires being mounted require more than the tire ma-
nufacturer's maximum bead seating pressure and , the
wheel should be removed from the tire changer, placed
in an inflation cage, and inflated per manufacturer's in-
structions
6. The use of inflation devices (e.g. guns) connected to power sources outside of the
machine is not permitted
7. Never place your head or any part of your body over a tyre during the inflation process
or when attempting to seat beads. This machine is not intended to be a restraining
device for exploding tyres, tubes or rims.
8. Always stand back from the tyre changer when inflating, never lean over.
An exploding tyre and rim may be propelled upward and outward with enough force to cause
serious injury or death.
Never mount any tyre unless the tyre size (molded into the sidewall) matches the rim size
(stamped into the rim) exactly or if the rim or tyre are defective.
Never exceed the tyre pressure recommended by the tyre manufacturer.
This tyre changer is not a safety device and will not restrain exploding tyres and rims. Keep the
area clear of bystanders.
9.
Crushing Hazard. Moving Parts Present. Contact with moving parts could result in an
accident.
• Only one operator may work with the machine at a time.
• Keep all bystanders clear of tyre changer.
• Keep hands and fingers clear of rim edge during the demounting
and mounting process.
• Keep hands and fingers clear of mount/demount head during
operation.
• Keep hands, feet and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use proper tyre lubricate to prevent tyre binding.
• Pay attention while moving tyre/rim or lever.
10. Electric Shock Hazard.
• Never hose down or power wash electric tyre changers.
• Do not operate the machine with a damaged power cord
• If an extension cord is necessary, a cord with a current rating equal
to or greater than that of the machine must be used. Cords rated
for less current than the machine can overheat, resulting in a fire.
• Care should be taken to arrange the cord so that it will not be
Operator's manual A 222
DANGER
71
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

A 222 ti

Tabla de contenido