Care Of Cooling Spray Nozzle Openings - Dentsply Sirona Midwest Stylus Plus Manual Del Operador

7 Reprocessing
52
7.3.3

Care of cooling spray nozzle openings

If your tap water is very hard, lime deposits may constrict or
completely block the cooling spray nozzles.
Interval
● At least once a week
1. Carefully clean the nozzle openings by running a cleaning wire
through them.
2.
Let the high-speed handpiece run briefly with cooling spray.
Operating instructions Midwest Stylus Plus / Midwest Tradition
67 27 148 D3673.201.09.01.02