Acqua Brevetti PuliMATIC Manual De Instrucciones Para El Uso Y El Mantenimientomanual De Montaje E Instalación página 40

A2.6 Diagnostics page
The diagnostic page is used to display the correct operation of the filter and to carry out
the filter disinfection procedure.
DIAGNOSTICS PAGE STEPS:
2- Access the diagnostics page
4.1 Manual step mode operation of the gearmotor
4.2 Manual continuous mode operation of the gearmotor
5- Solenoid valves enabling/disabling (Optional)
6- Confirm settings
Hall Sensor:
Pressure Sensor:
Motor:
Solenoid 1:
Solenoid 2:
Mot Ext
1- Access the diagnostics page
2.1- Manual step mode operation of the gearmotor
2.2- Manual continuous mode operation of the gearmotor
3- Solenoid valves enabling/disabling (Optional)
3- Confirm settings
If the filter is not in the correct position when exiting the diagnostic page, the gearmotor will start to
rotate until the system reaches the original filtration position.
PuliMATIC - ENGLISH
ON
OFF
OFF
OFF
OFF
Rly
Press
Press
Press
Press
Press
MAN141 PAGE E-14
sequentially and hold the pressure for 7
seconds on the indicated buttons
repeatedly to operate the gearmotor in step
mode
hold the pressure to operate the gearmotor in
continuous mode
to activate the solenoid valve (ON) or
deactivate it (OFF)
to confirm and exit the diagnostic page