Acqua Brevetti PuliMATIC Manual De Instrucciones Para El Uso Y El Mantenimientomanual De Montaje E Instalación página 37

The panel has a specific input for the voltage-free contact with which PuliMATIC is equipped. The
connected devices are controlled by the panel when the voltage-free contact signal of the
PuliMATIC filter is received (washing stage). At the end of the washing procedure, a signal is sent
to switch off/close the devices connected to the panel.
A1.15 Other connections (optional)
PuliMATIC has two outputs for managing auxiliary equipment (e.g. solenoid valves,
alarms ...) and an input for the pressure differential switch to be connected as follows:
Remove the rear cover by using a screwdriver, inserting it in the 2 slots, and proceed as shown in
the following figure:
under such cover there are four electrical connections:
PuliMATIC - ENGLISH
MAN141 PAGE E-11