Tecno-gaz Hydra EVO Instrucciones De Uso página 30

ENGLISH
10 COMMISSIONING AND PREPARING FOR STERILIZATION
1. Fill in the water tank (see paragraph 8);
2. Push the MAIN BUTTON
3. Open the door 1A;
4. Push the button
It is important that you
check continuously that the
level of the water is not
exceeding the metal tablet
so that the water is not
going out.
Autoclave
HYDRA EVO
HYDRA EVO
PLUS
If you try to start the cycle up without respecting this minimum period
ATTENTION:
the autoclave is showing ERROR 400.
5. Leave the button
ATTENTION: Let always water inlet before starting the sterilisation cycle up
6. Put the instruments on the trays according to the statements shown at the beginning of
the manual;
7. It is very important not to lay the instruments upon another. Do not overcharge the trays.
8. Each time you start a sterilization cycle up you have to put in the chamber an integrator
to receive a confirmation of the sterilization. We suggest to put the integrator in the
middle of the chamber.
12
to start the machine;
PUMP to let the water in the chamber.
Photo E
20
25
PUMP to stop the water inlet.
Time (sec.)
Photo E
30
35