Technical Description; Technical Data - ESAB TIGAID 315 AC/DC Instrucciones De Uso

ENGLISH

TECHNICAL DESCRIPTION

The equipment is designed to permit welding with alternating and direct current.
Sockets on the front permit connection of a TIG torch and welding cables with
handsets for coated electrodes.
TIGAID 315 AC/DC may be connected to 115, 230, 240 V 50/60 Hz single phase
mains supplies.
There is also a version with a 24 V socket, which can be connected to a power
socket on the power source.
The unit has a gas control system that supplies the torch with shielding gas during
welding. Time delays for switching on and off the welding current are fully adjustable.
There is also an arc ignition feature, which uses a harmless high voltage spark to ig-
nite the arc during DC welding.
During AC welding ignition pulses are used to stabilise the arc so that it is not extin-
guished during the zero voltage phase of the alternating current cycle.

TECHNICAL DATA

Voltage
Permissible load
at 35 % duty cycle
Relay rating
Gas pre--flow
Gas post--flow
Gas flow rate
Slope up
Slope down
Dimensions (lxbxh)
Weight
WARNING
This product is intended for industrial use. In a domestic or office envi-
ronment it may cause radio interference. It is the user's responsibility to
take suitable precautions.
bt11d12e
115,230, 240 V 50/60 Hz
or 24 V, 50/60 Hz
315 A
200 A DC
0.1--5.0 s
1.0--60 s
4--10 l/min
0.1--10 s
0.1--10 s
340x300x315
15 kg
- - 28 - -