Safety; Safety Marking; Safety Devices; Disposal - Tecno-gaz KYRI Instrucciones De Uso

3
3.1

Safety marking

3.2

Safety devices

The chair is supplied with the following safety devices:
- Automatic release of the motor on the back
- Sensor under the leg guard
- Anti-crushing sensors on the rear part of the footboard
- Anti-crushing sensor on the tube holder arm (on request) or Mayo table holder arm
(on request).
The chair also has an automatic clamping input for the use of dynamic instruments (only
in combination with Kyricart).
3.3 Safety devices
 In accordance with the regulations in force, the manufacturer is responsible for the
product placed on the market. Responsibility ceases the moment when operations are
performed on the device by unqualified personnel or with non-original spare parts.
 The chair must not be installed in a room where there is potentially explosive or
flammable atmosphere.
 The chair must be installed in an environment that is compliant with the legislative
requirements in force.
3.4

Disposal

This product is subject to Directive 2002/96/EC of the European Parliament and of
the Council of the European Union on waste electrical equipment (WEEE). In
jurisdictions adopting this Directive, the product was launched on the market after 13
August 2005 and must not be disposed of as non-recyclable household waste. Use
local WEEE collection facilities for the disposal of this product, or comply with the
regulations in force.

SAFETY

DANGEROUS
VOLTAGE
ENGLISH
GROUND CONNECTION
3