Adjust The Cutting Diameter; Line Cut-Off Blade; Operation Tips; Cutting Tips - GreenWorks Pro 2103902CT Manual Del Operador

8.5

ADJUST THE CUTTING DIAMETER

NOTE
The machine is set at a 11 in. (27.9 cm) cutting
diameter. You can adjust to a 13 in. (33 cm) cutting
diameter.
Set the cutting diameter to 11 in. (27.9 cm) for greater
runtime and 13 in. (33 cm) for a larger cutting area.
1. Remove the battery pack.
2. Remove the blade screws (2) from the cut-off blade
(1).
3. Turn the cut-off blade 180°.
4. Tighten the blade screws.
2
8.6

LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade (1) on
the guard. The line cut off blade continuously trims the
line to ensure a consistent and efficient cut diameter.
Advance line whenever you hear the motor running
faster than normal, or when trimming efficiency
diminishes. This will maintain best performance and
keep line long enough to advance properly.
8.7

OPERATION TIPS

WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep a firm hold with the two hands on the machine
while you operate the machine.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Remove the battery pack.
• Remove the grass.
English
8.8

CUTTING TIPS

1
• Tilt the machine toward the area to be cut. Use the
tip of the cutting line to cut grass.
• Move the machine from right to left to prevent
thrown debris from hitting the operator.
• Do not cut in the danger area.
• Do not force the trimmer head into uncut grass.
• Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood
can wear the cutting line quickly.
DANGER
AREA
9

MAINTENANCE

Read and understand the safety regulations and the
maintenance instructions before you clean, repair or
do the maintenance work on the machine.
Make sure that all nuts, bolts and screws are tight.
Examine regularly that you install the handles tightly.
9
DIRECTION OF
ROTATION
BEST CUTTING AREA
IMPORTANT
IMPORTANT
EN